Power connector for dolls house lighting & wiring. Includes 1.6A fuse and LED power indicator light.
There are 2 pairs of (+/-) output terminals. Output terminals are always on when power is connected. This connector is suitable for connecting power to copper tape wiring systems or for wired lighting systems where only a small number of lights need to be connected.
This socket strip connector has a 2.1mm connector socket which is directly compatible with our Digital Power Supplies (PS100, PS200, PS300 & PS500). Alternatively the two screw terminal input next to the 2.1mm socket can be used to connect other types of power supply.
To install dolls house lighting simply connect a 12v power supply (transformer) and connect twin wires from lights to the output +/- screw terminals.
Maximum power input: 12V DC 3A.
Maximum power output: 2.0A total between all channels.
Fuse included: 1.6A (20mm x 5mm).
Dimensions (WxL): 44mm x 30mm
Replacement fuses: DE24E017.
Important Safety Information
Dolls house wiring and lighting components are generally rated for 1.5A - 2.0A. This connector strip should only be used with a suitable power supply and lighting components. If exceeding 1.5A - 2.0A load, this should be split between separate fuse protected circuits to avoid overloading wiring and components. Do not attempt to install dolls house wiring systems without suitable knowledge and experience. Do not leave dolls house lighting switched on unattended. Switch power off at the wall when not in use or when unattended.
